 | Hose & Fittings |
 |
Heavy duty-thick walls prevent collapse or kinking
Black in color for easy concealement
US sizing... |
|
| Pond Foam |
|
 Fills in cracks between rocks for improved waterfall appearance. Dries to touch in 10 minutes and cures in one hour... |
|
| PVC Adapters & Unions |
|
 PVC adapters and unions, as well as many other critical components of pond plumbing supplies, are listed in this se... |
|
| PVC Bulkheads |
|
 Quality Bulk Heads that allow for clean side wall or bottom penetration through liners, filter boxes, etc. |
|
| PVC Sight Glass |
|
 See what you are sending out to the sewer system and save money on your water bill. Easy to install, the sight glas... |
|
| PVC Valves |
|
 These Single Union Ball Valves are not quite up to the quality standards of our SUBV series but are quite satisfact... |
|
| Tangential Pond Return |
|
 Pond return can be set at an angle for better circulation. Full smooth flow with no obstuction. Perfect for concret... |
|
| Fernco Rubber Couplings |
|
 Use these heavy duty rubber couplings to join PVC and flexible PVC together. Stainless steel clamps on both ends as... |
|
| Bottom Drains |
|
 Simply the best bottom drains on the market!
Quality materials and superior construction differentiates the Rhino ... |
|
| Flanged Connectors |
|
 These Flanged Connectors by Dream Pond are great for tank and liner installations.
Wide flange for better li... |
|
 Building a Koi pond
Planning, patience, persistence.
The three key commodities that are absolutely essential in order to succeed.
We have attempted to provide you with some general rules that apply to all Koi ponds no matter what materials you use in your construction. These are common sense practices which we sometimes tend to overlook.
How Deep Should a Koi Pond be?
A Koi pond needs to be at least 3-feet deep, preferably 4-feet, and in most cases does not have to be over 6-feet deep unless you are trying to grow jumbo show Koi.
In colder climates 4-feet would be the minimum and an area that is 6-feet in part of the pond. In warmer climates you can get away with 3-feet deep, but remember that a shallow pond will heat up and cool quicker, which is not good for the Koi.
Maintenance Planning - Plan ahead
A Koi pond should be as maintenance free as possible, so when planning the location of your bottom drains keep in mind that they will only draw from a radius of 4 to 6 feet. Plan to have enough bottom drains to remove the debris & silt from the bottom of your pond.
Some components to consider
Make sure to install a skimmer and as far away from the waterfall or water return as possible, so that all floating debris to the can flow towards the skimmer.
A vortex, if space and budget allow, is very beneficial for your biological filter, as it will catch the bigger debris and cause less clogging in the bio-filter.
Basic design considerations
The pond edge should always be higher than the surrounding ground to avoid runoff water that could have chemicals from fertilizers, fungicides, and just any debris lying on the ground.
Keep the pond away from trees for two reasons: their roots could damage your pond and you don’t want to have to remove leaves all the time. Leaves in the pond will upset your pond’s water chemistry.
You will want to place the pond in an area close to your house, so that you can enjoy it from inside during inclement weather.
Budget
The last consideration is probably the most important, your Budget. This will determine the size of your pond as much as the space you have allocated for it. You should consider everything for the pond—filters, pumps, plumbing, electrical, stonework, landscaping and any other expenses associated with your pond. Once this is done you can begin construction.
|